Shizhan aluminum alloy stage line array truss has strong pressure resistance and can be used for various large scale performances. The aluminum stage line array truss is used for the stage set up of the star's performance, the company's event celebration, and the set placement.
The structure of stage line array truss is rarely used in public buildings such as large span factories, exhibition halls, stadiums and bridges. Stage truss lower chord important to bear axial force straight rod in response to the node articulated into a geometrically invariable lattice load-bearing structure, located on the lower edge of the truss rod.
In order to extend the stage surface and increase the entertainment atmosphere, the stage can be extended from under the main stage and lifted flat to a plane with the main stage, so that the players have more space to play and approach the audience to reach various special results. When not in use, the stage can be retracted into the main stage to increase the stage distribution area.
The more important meaning of Shizhan aluminum alloy Stage line array truss is that it can transform the complex stress condition inside the solid web beam under cross bending into simple tensile and compressive stress condition inside the truss rod, which can understand the force distribution and transmission intuitively and facilitate the change and combination of planning.
Aluminum Stage line array truss is generally made of 6061-T6 aluminum through a series of cutting, grinding, processing, welding, painting, etc. It is very widely used, but people don't pay much attention to it. Aluminum Stage line array truss is very sensitive to build up and can build up different size of truss system according to the need. Compared with iron truss, aluminum stage line array truss is made of 6061-T6 aluminum alloy, which has stronger anti-corrosion property and longer service life.
Which stage line array truss has a more stable and solid structure?Shizhan Stage line array truss manufacturer recommends triangular stage line array truss. physically, triangular shape is a more stable structure, and it can save more in terms of material. Therefore, in some cases, it is very wise to use triangular Stage line array truss.
The collapsible triangle Stage line array truss produced by Stage line array truss manufacturer is a stable and solid truss structure with greater load bearing capacity and span compared to the same size truss, and the collapsible triangle truss is a pin interface, so the installation is fast.
Stage line array truss manufacturer mentions that trapezoidal truss (or quadrilateral truss) has improved the force condition of the rod compared with triangular stage line array truss, and it is easier to meet the process requirements of certain industrial plants when used in roofing. If the upper and lower chords of the trapezoidal truss are parallel, it is a parallel chord truss, and the load on the rod is slightly worse than that of the trapezoidal truss, but the type of web is greatly reduced, and it is used in bridges and trestle bridges.
Most of the products produced by Shizhan aluminum stage line array truss manufacturers are used as roof supports for large buildings, so convenience is one of the factors to consider when erecting them. Aluminum stage line array truss is convenient and fast to erect, and the performance is also very good, in addition to these two points, it has many other advantages, what are they, let's look down together!
Advantage 1: the speed of building
Shizhan aluminum alloy stage line array truss manufacturer's products have a standard high span ratio, which makes this product very convenient to build, because this product is directly on the steel beam when building, so it will make the time to build this product will be greatly reduced.
Advantage 2: Good force-bearing capacity
The force capacity makes the speed of erection faster, but the pre-arched degree makes this product have good force capacity. Because bad bearing capacity may lead to cracks in the building, it is very important to determine the bearing capacity in advance when erecting aluminum stage line array truss.
Advantage 3: More economical
In addition to beauty and practicality, people are instead more concerned about the price of the product, or it can also be said that this product is economical. Galvanized sheets can produce up to 96% utilization and are also only 0.5 mm thick, but they are easy to erect and have a strong resistance to pressure, making them a very practical building material.
Shizhan aluminum stage line array truss is not only used in normal buildings, but also in some temporary buildings, and the aluminum truss stage has good pressure resistance. This kind of outdoor truss construction is also able to ensure that it is not corroded.