Aluminum truss stage should use high-quality 6061-T6 aviation aluminum, because the aluminum alloy material is rust-resistant and corrosion-resistant, has good outdoor practicability, and is known as "never rust". The wall thickness of the stage tube should reach 3.0mm, the frame of the stage and the side piece under stress should be 5*7, and the column should be 50 round pipe, so as to meet the material selection requirements of aluminum truss stage.
2. Fish scale welding
"Fish scale welding"-is a mature welding technology in aluminum welding, the welding surface is uniform and firm without losing the sense of beauty;
3. Exquisite polishing
The stage welding and sharp corners need to be rounded;
4. Easy to disassemble and assemble
The stage supports can be disassembled completely, which is convenient for storage and transportation;
1) Aluminum truss stage uses 6061-T6 national standard aluminum material, which can have good compression, torsion and drop resistance, and is suitable for various outdoor construction environments.
2) The stage is required to have strong stability, high load-bearing capacity (1000kg/m2, single-point load-bearing 500kg), no depression in the middle of the stage, and good integrity.
Many times the stage is built outdoors. It is likely that the stage is not smooth and smooth due to uneven ground. The aluminum truss stage purchased according to the above method can achieve the requirements of flat construction by adjusting its own column adjustment legs. Aluminum truss stage has super load-bearing capacity. In activities such as regular auto shows, off-road vehicles and cars can be easily displayed on the aluminum truss stage to reproduce the super load-bearing capacity of the stage. Aluminum truss stage usually has a service life of about 10 years. It can be repeatedly disassembled, built and used. It is a modern block-mounted stage product with high utilization rate and practicality.
The weight is half lighter than the traditional iron stage, which saves a lot of cost and energy for construction and transportation.
2. Excellent corrosion resistance and durability
Compared with the iron truss, the aluminum alloy truss is made of 6061-T6 aluminum alloy, which has excellent anti-corrosion performance and has a service life of more than 10 years.
3. Excellent resistance to pressure
Aluminum truss stage generally has an average load-bearing capacity of more than 600kg. Meet the needs of large-scale audio equipment for various performances and music.
1. Aluminum framed stage
The aluminum framed stage means that the audience is located on one side of the stage, while the rest of the stage is obscured by objects for the actors and technicians to make preparations.
2. Aluminum stretching stage
The difference between the aluminum alloy stretched stage and the mirror-framed stage is that a part of the stage protrudes forward and extends to the auditorium, and three sides of this part are exposed to the audience.
3. Aluminum ring stage
The aluminum ring-shaped stage means that the audience is located around the stage, usually the ring-shaped stage is located in the center of the theater, and the audience can enjoy the performance at close range.
Aluminum truss stage events with different themes require different stage structures. Therefore, when building an aluminum truss stage, the first thing to be determined is the theme of the activity. After the theme of the activity is determined, a structure that is more in line with the theme can be designed. Then, the preparation work must be done adequately, all kinds of materials are prepared, and the aluminum truss stage is selected according to different themes. There is also the scene layout of aluminum truss stage truss construction. The area, volume, and style of it must be considered in advance. Then there is the lighting, which must show the effect of the stage activities, and the lighting can also show the style, must choose the lighting that meets the theme of the stage, and plan the budget for building aluminum truss stage trusses.