The aluminum alloy round tube buckle truss, which is quietly popular abroad, is made of GB6061-T6;
Using aluminum alloy buckle butt joint, the arc of the fastener is completely consistent with the main truss, and the butt joint is seamless;
Aluminum alloy primary color products:
Surface black spray color treatment:
Aluminum alloy polished buckle
300*300*300 adapter
Carrying capacity: After the simulation analysis of the 2.7-meter truss, the deflection of the middle part is less than 5mm, the overall stress distribution is relatively uniform, and the connection between the inclined pipe and the lower main pipe is relatively large, about 70Mpa. The stress distribution at the junction of the two ends of the truss main pipe and the angle aluminum is concentrated and reaches the model maximum value of 94 Mpa (as shown in the red circle in the above figure). The theoretical yield strength of the material σ=2.750e+008N/㎡, the safety factor of finite element analysis is about 2.9 times, and the theoretical maximum load is about 1450kg.
Shipping container site
Japan exhibition installation site
Shizhan Group is committed to truss production, R&D and export. It has more than ten years of production experience in the field of stage truss manufacturing. It can provide customers with a variety of truss system solutions. For more information on high-quality truss products, please contact -jsshizhan@shizgroup.com
Related Recommendation
One-board four-leg stage structure
Safety guide for stage construction
The difference between truss and Layher