Types of Aluminum Lightweight Customized Scaffolding – SHIZHAN

Aluminum Scaffolding is now widely used in my country's construction industry. It is a variety of supports erected to ensure the operation and horizontal transportation of construction personnel, and has a very heavy weight in the construction of construction projects. Because different types of constructions require different types of scaffolding, there are many lightweight scaffolding types. The following SHIZHAN group will give you an in-depth understanding.

Aluminum Scaffolding types could be three according to the purpose

1. Operation (job) scaffolding

Operation (work) scaffolding is a scaffold that provides high-altitude working conditions for construction operations, and is further divided into structural work scaffolding (structural scaffolding) and decorative work scaffolding (decorative scaffolding).

2. Protective scaffolding

Protective scaffolding refers to scaffolding that is only used for safety protection, including various guardrails and scaffolding.

3. Scaffolding for load-bearing and support

Load-bearing and supporting scaffolds refer to scaffolds used for material operation, storage, support and other bearing purposes, such as receiving platforms, formwork supports and installation supports.

lightweight scaffolding types could be four according to structure

1. Rod combined scaffolding

Rod combination scaffolding is commonly known as "multi-pole scaffolding", referred to as "rod group scaffolding".

2. Frame combined scaffolding

Frame combined scaffolding is a scaffold composed of a simple plane frame (such as a gantry) and a combination of connecting and supporting rods, referred to as "frame scaffolding", such as portal steel scaffolding, ladder steel scaffolding, etc.

3. Lattice component combined scaffolding

The lattice member combined scaffold is a scaffold composed of a truss beam and a lattice column, such as a bridge scaffold.

4. Stand

The bench is a platform frame with a certain height and an operating plane. Most of it is a stereotyped product. It has a stable spatial structure and can be used alone or can be increased vertically and horizontally connected to expand, and often comes with a mobile device.

Customized scaffolding types could be six according to the setting form

1. Single row scaffolding

Single-row scaffolding refers to scaffolding with only one row of vertical bars, and the other end of the small cross bar rests on the wall structure.

2. Double row scaffolding

Double row scaffolding refers to scaffolding with two rows of poles.

3. Multi-row scaffolding

Multi-row scaffolding refers to scaffolding with more than three rows of poles.

4. Full house scaffolding

The full-scale scaffolding refers to the scaffolding that is fully installed according to the scope of construction work and has more than three rows of poles in each direction.

5. Cross-circle (peripheral) scaffolding

Cross-circle (peripheral) scaffolding refers to the scaffolding that is set along the periphery of a building or work area and connected to each other in a circle.

6. Special-shaped scaffolding

Special-shaped scaffolding refers to scaffolding with special plane and space shape, such as for chimneys, water towers, cooling towers and other special forms of building construction such as circular, annular, outer and inner circle, polygon, upward expansion, and upward contraction. scaffold.

Aluminum Scaffolding types could be six according to the way of support

1. Floor-standing scaffolding

Floor-standing scaffolding refers to scaffolding that is erected (supported) on the ground, floor, roof or other platform structures.

2. Overhanging scaffolding

Overhanging scaffolding is referred to as "shovel scaffolding", which refers to the scaffolding that is supported by cantilevering.

3. Wall hanging scaffolding

Wall-mounted scaffolding is referred to as "hanging scaffolding", which refers to the stereotyped scaffolding which is hung on the hanging parts of the wall in the upper part or (and) the middle part.

4. Suspended scaffolding

Suspended scaffolding is referred to as "hanging scaffolding", which refers to the scaffolding suspended under the cantilever beam or engineering structure. When a basket-type work frame is used, it is called a "going basket".

5. Attached lifting scaffold

Attached lifting scaffold is referred to as "climbing frame", which refers to the suspended scaffold that is attached to the engineering structure and relies on its own lifting equipment to achieve lifting.

6. Horizontal mobile scaffolding

Horizontal moving scaffolding refers to scaffolding with walking gear or operating platform frame.

lightweight scaffolding types could be two according to the connection method

1. Socket scaffolding

Socket-type scaffolding refers to a scaffold that adopts a socket-socket connection between a flat rod and a vertical rod. Common socket-socket connection methods include inserts and wedge grooves, inserts and bowl buckles, sleeves and plugs, and U-shaped brackets, etc. .

2. Fastener scaffolding

Fastener-type scaffolding refers to the scaffolding that uses fasteners to fasten the connection, that is, the scaffolding that assumes the connection function by the friction force generated by tightening the fastener bolts.

Other classification methods

1. According to material specifications, it can be divided into bamboo scaffolding, wooden scaffolding, steel pipe or metal scaffolding, and portal combined scaffolding;

2. According to the erection position, it can be divided into outer scaffolding and inner scaffolding;

3. According to the occasion of use, it can be divided into high-rise building scaffolding, chimney scaffolding, water tower scaffolding, etc.

Jiangsu Shizhan Group Co.,Ltd. was found in 2004 which is specialized in R&D, production and sale of Truss, Stage, Barrier, steel ringlock Scaffolding. As a scaffolding supplier company, Shizhan covers an factory area of 35,000m², headquarters located in Wuxi, China. One hour from Shanghai by high-speed train.