When holding events or performances, often use Aluminum stage lighting truss to build the stage, this stage is also in recent years gradually appeared in everyone's vision, this product than ordinary products more popular, know why this is?
1. Stage splicing method
Aluminum stage lighting truss has many splicing methods, aluminum alloy stage, aluminum alloy stage, aluminum alloy stage, aluminum alloy truss stage, etc. Aluminum stage by aluminum alloy stage column, aluminum alloy stage frame and stage plate and other components. The main stage frame of aluminum alloy Rhea frame stage is aluminum alloy Rhea frame. A variety of splicing ways to choose, more selective than the ordinary stage.
2. whether to fold
Aluminum stage lighting truss built stage according to whether the folding, and can be divided into fixed aluminum stage, aluminum folding stage. The emergence of folding stage makes the stage more convenient to build, stage storage and transportation more convenient. This is also better than the ordinary stage point.
Aluminum stage is lightweight, easy to build, not easy to rust, aluminum stage reuse rate is high, the service life of the ordinary stage several times longer, and beautiful, simple routine maintenance, good economic benefits.
When fixing aluminum stage lighting truss, round tube truss and square tube truss are often used, so is it better to use round tube truss or square tube truss?
The round tube truss is a widely used truss, which can be used for building showrooms or backdrops in both indoor and outdoor areas. The truss can replace the traditional aluminum alloy lighting frame, which cannot be folded, so the bearing capacity is also quite large and the span can reach 13 meters without support. The round tube fixed truss needs to be used with square head when it is used.
The fixed truss is mainly welded with welding points on all four sides to ensure its solid performance and durability. It is also much stronger than the usual two-sided welding, then it is made of high strength material, high strength and durability, and the overall product is exquisite and easy to use, and the transportation is also quite fast and convenient, the space occupied during transportation is different for different product types, which needs to be considered when purchasing.
Square tube fixed truss is a common truss in the market, it not only builds span but also withstands great strength, good transportation and storage, good installation and fixing, indoor and outdoor can be used. The Aluminum stage lighting truss is more cost effective as it does not require square head connection. The application of square tube in the structure is not limited to the composition of the analysis frame, it can also be effectively used as a light column, when it can also be filled with concrete, forming a square steel pipe concrete column, to achieve the effect of less floor space. Although the thin-walled square tube is more prone to local buckling than round tube, and the ductility is not as good as round tube when bending, but it can be used as a compression bar when the strength of the plate after buckling, on the other hand, the node structure of square tube frame is much simpler than round tube, so it is more common to use square tube to manufacture frame than round tube.
Aluminum stage lighting truss is a kind of equipment often used when building lighting stage and gantry. When using it, it is usually equipped with accessories such as base, square sleeve, counter head, cross brace, inclined support and hand pulling hoist, etc. Pay attention to the welding seam orientation. Each truss can be said to have experienced a lot of vicissitudes before forming, and the weld seam left by each welding will be scattered not only at the nodes but also at other places, such as the middle of the bottom welding, and the truss will be simply deformed in order to reach the even force. When buying, you can judge its quality by the following aspects.
1. Observe whether the welding point is even and smooth. If there are some metal lumps on the truss, it is likely to be because the temperature is too high in the welding in order to master the suitable temperature, thus leading to liquefaction reaction at one end and thus deformation.
2. The aluminum light stand should be placed on a solid and smooth ground. Stop on ice, snow or skiing without anti-slip and fixed equipment.
3. try not to use the aluminum alloy light frame in windy climate.
4. When climbing, people hold the Aluminum stage lighting truss with both hands and keep the body in the middle of the two ladder posts.
5. metal ladders conduct electricity, avoid approaching the place with electric field.
6. When working, do not stand on the ladder within 1 meter from the top of the ladder. Always maintain a protective height of 1 meter, not to mention climbing the top support point.
7. Stop crossing directly from one side of the ladder to the other side.
The quality of Aluminum stage lighting truss and the use of precautions are introduced here, if you need, welcome to contact us Shizhan Group.
Related Recommendations
The knowledge of the stage lighting truss You need to know
The development and demand of aluminium lighting truss
How to choose stage lighting truss?
Portable stage lighting truss,the Guardian of construction workers
Top
